Testking ibm 000-078

By PassGuide-IBM Study Guide | Sep 21, 2008
Visited 661 times, 3 so far today

eServer BladeCenter : 000-078 Exam

Test information:
• Number of questions: 74
• Time allowed in minutes: 120
• Required passing score: 60%

Related certifications:
• IBM Certified Specialist – IBM BladeCenter V4
• IBM Certified Systems Expert – IBM BladeCenter V4

Exam Topics Include:
• BladeCenter Principles
• BladeCenter Installation / Configuration
• Blade Deployment
• Identifying Problems and Resolving Them
• Maintenance / Upgrade

1. What permits concurrent outofband KVM access to all blades in a chassis?

A.IBM BladeCenter chassis with Advanced Management Module, LS20 blades, cKVM adapters, Copper

PassThru Module

B.IBM BladeCenter H chassis with Advanced Management Module, HS20 blades, Cisco IGESM

C.IBM BladeCenter chassis with Advanced Management Module, HS21 blades, cKVM adapters, Nortel L2/3

GbESM

D.IBM BladeCenter H chassis with Advanced Management Module, HS21 blades, cKVM adapters, Infiniband

Switch Module

Answer: C

2. Which component or feature is ONLY available in BladeCenter S? A.4x Infiniband Switch Module
B.4Gb Infiniband Switch Module

C.Up to four 950W/1450W power supplies

D.2000w Power supply Modules

Answer: C

3. If the integrated service processor on the blade server fails, which procedure allows the administrator to receive alerts?
A.enable RSA II adapters to generate alerts

B.configure Network Equipment Building Standard (NEBS) compliant server to provide alerts

C.ensure SNMP is active to ensure service processor integrated into every blade server can provide alerts D.ensure SMTP is active to ensure service processor integrated into every blade server can provide alerts Answer: C

4. A customer deploys an IBM BladeCenter chassis with one Brocade 4Gb SAN switch module. The customer requires a 4Gb uplink or higher. Which configuration will meet this request?
A.Brocade 20port 4Gb SAN switch module and Brocade ISL Trunking for IBM BladeCenter

B.Brocade 20port 4Gb SAN switch module and Brocade Advanced Performance Monitoring for IBM

BladeCenter

C.Brocade 10port 4Gb SAN switch module and Full Ports on Demand license

D.Brocade 10port 4Gb SAN switch module and Brocade Advanced Performance Monitoring for IBM BladeCenter
Answer: A

5. Which tool is used to automatically deploy a JS21 blade with SuSE 9? A.AutoYaST
B.JumpStart

C.KickStart D.Sysprep Answer: A

6. A customer purchased an IBM BladeCenter with six blades running Microsoft Windows 2000 Server. With

the additional open blade slots, they have a requirement to automatically deploy images upon blade installation. Which action is required to implement this task? (Select the best answer.)
A.Ensure Director Agent is installed on the BladeCenter Chassis. Then run BladeCenter Configuration task on

BladeCenter Chassis from IBM Director Console.

B.Ensure Server Plus Pack option has been installed and configured. Then, run BladeCenter Configuration task on BladeCenter Chassis from IBM Director Console.
C.Ensure an IBM Director Server and Remote Deployment Manager (RDM) have been properly installed and

configured. Ensure that RDM images are created and available. Then, Run BladeCenter Deployment Wizard task on BladeCenter Chassis from IBM Director and assign profiles to each of the slots.
D.Run BladeCenter Management task on BladeCenter Chassis from IBM Director Console. Then, Run BladeCenter Deployment Wizard task on BladeCenter Chassis from IBM Director and assign profiles to each of the slots.
Answer: C

7. A customer has an HS21 7995 blade with a 73GB hard drive, 4×512MB DIMMs in slots 1, 2, 3 and 4, 2×1GB

DIMMs in slots 5 and 6, and 2×512MB DIMMs in slots 7 and 8 for a total of 5GB (in a flat memory configuration).

The blade only shows 2GB of memory available. What is the cause of this problem? A.The memory should be installed from lowest to highest capacity.
B.The mirrored memory setting needs to be selected. C.The memory pairs are in the wrong DIMM slots.
D.All memory in the system must be the same type. Answer: C

8. Which bays do the MultiSwitch Interconnect Module populate? A.3 and 4
B.3, 4, 5, and 6

C.7 and 9

D.7, 8, 9, and 10

Answer: D

9. A customer has the following requirements for an IBM BladeCenter solution:

four 4socket Microsoft SQL servers with two hot swap SAS drives

two physical Microsoft Active Directory Servers

twentytwo physical Citrix servers

three physical Web servers

one physical Virtual Center Management server

eight VMware ESX hosts

Which configuration satisfies these requirements?

A.four IBM BladeCenter chassis, two Nortel Fibre modules, eight Ethernet modules

B.three IBM BladeCenter chassis, four QLogic Fibre modules, six Ethernet modules

C.three IBM BladeCenter chassis, two Brocade Fibre Channel modules, eight Ethernet modules D.four IBM BladeCenter chassis, two Brocade Fibre Channel modules, eight Ethernet modules Answer: D

10. A customer wants to add the following servers:

two dual core, AMDbased, running VMware ESX Server

two dual core, POWER based, running Linux

The requirements are:

all servers require internal hard drives to boot, and mirroring

all servers require access to the existing SAN storage with existing multiswitch Brocade fabric

the customer requires high availability to the SAN and LAN What satisfies the customer’s requirements?
A.IBM BladeCenter Chassis with two Brocade Entry SAN Switch Modules

two LS21 blades two JS21 blades SAS Drives
Fibre Channel expansion cards for all blades

two Ethernet switch modules

B.IBM BladeCenter Chassis with one Brocade 20port Enterprise FC Switch Module two HS21 blades
two JS21 blades

SAS Drives

Fibre Channel expansion cards for all blades one Ethernet switch module
C.IBM BladeCenter Chassis with two Brocade 20port Enterprise FC Switch Modules

two LS21 blades two JS21 blades
Fibre channel expansion cards for all blades

SAS Drives

two Ethernet switch modules

two Storage I/O expansion blades

D.IBM BladeCenter Chassis with two Brocade 10Port Enterprise SAN Switch Modules two HS21 blades

two JS21 blades

SCSI hard drives

SAS hard drives

Fibre Channel expansion cards for all blades two Ethernet switch modules
Answer: C

11. A customer has the following BladeCenter requirements:

Support direct fibre connections from the blades to an existing SAN switch

Support total of six RJ45 Ethernet ports per module

Which of the following module combinations will satisfy the customer’s requirements?

A.BladeCenter with Optical Passthru Modules and Nortel Networks Layer 27 GbE Switch Modules B.BladeCenter with Optical Passthru Modules and Nortel Networks Layer L2/3 Copper GbE Switch Modules C.BladeCenter with Copper Passthru Modules and Nortel Networks L2/3 Copper GbE Switch Module D.BladeCenter with 2port Fibre Channel Switch Modules and Nortel Networks Layer 27 GbE Switch Module Answer: B

12. A customer has the following configuration:

one IBM BladeCenter H chassis with one Copper Passthru Module

eight HS21 single processor blades, single hard drive, and base memory

How can the customer provide power redundancy to the Copper Passthru Module and the eight blades in the chassis?
A.install a midplane expansion kit

B.add an additional pair of 2900w power supply modules

C.upgrade the power supplies from 2000w to 2900w

D.move one power supply from power domain 1 to power domain 2

Answer: B

13. A customer has an IBM BladeCenter H chassis with three, LS41 4socket blades installed. Each blade has

the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the

following configuration:

two Brocade 20Port SAN Switch Modules

two Nortel Networks L27 GbESM

a redundant Advanced Management Module

a LS41 4socket blade

What is the minimum number of power supplies needed for this configuration to have full redundancy? A.1
B.2

C.3

D.4

Answer: D

14. A customer wants to implement the following solution in an environment requiring DC power:

seven HS21 blades

three LS41 blades with MultiProcessor Expansion Unit and Combo Form Factor horizontal card

What is the minimum amount of rack space needed? A.7U
B.14U

C.16U D.24U Answer: D

15. A customer wants to implement the following solution:

seven HS21 blades

six LS41 HE blades with Multiprocessor Expansion Unit

one 1U external Fibre Channel switch

two 3U Fibre Channel storage devices with fourteen 146GB drives

What is the minimum amount of rack space required to implement the solution?

A.10U

B.14U C.21U D.28U Answer: C
16. A customer wants to set up a 512node High Performance compute cluster BladeCenter environment for an extremely high bandwidth application. What is the appropriate switch module to interconnect the required
multiple chassis? A.Infiniband Switch Module
B.BladeCenter Copper Passthru Module

C.BladeCenter Optical Passthru Module

D.Nortel Networks Layer 27 GbE Switch Module

Answer: A

17. A customer purchases a new IBM BladeCenter chassis with ten blades. They require a direct connection from both Gigabit Ethernet ports on each blade to an external core gigabit Ethernet switch. What satisfies the current infrastructure requirements?
A.IBM BladeCenter Copper Passthru Modules

B.Server Connectivity Module for IBM BladeCenter chassis

C.Nortel Networks L2/3 Copper GbESM for IBM BladeCenter chassis

D.Cisco Systems Intelligent Gigabit Ethernet Switch Module

Answer: A

18. An IBM BladeCenter chassis is populated with six HS21 blades in slots 1 to 6 and three JS21 blades in slots 9 to 11. The chassis also contains two Optical Passthru Modules that connect to a SAN infrastructure. How many Optical Passthru Module cables are needed for dualport access on each blade?
A.2

B.4

C.6

D.8

Answer: C

19. A customer has an IBM BladeCenter chassis with ten HS21 blades, each with Fibre Channel expansion cards. The customer requires connecting these blades to a DS4700 storage with two separate 4Gb SAN fabrics. The customer has two external Brocade Fibre Channel switches and two internal Brocade Enterprise switch modules. What is the minimum cabling solution for a redundant environment?
A.one LCLC 5M cable from each Brocade switch module to each external Brocade switch

B.four SCSC 5M cables from each Brocade switch module to each external Brocade switch

C.one LCSC 5M cable from each Brocade switch module to each of the external Brocade switches D.one pair of SCSC 5M cables from each Brocade switch module to each external Brocade switch Answer: A

20. A customer has the following requirements for a new IBM BladeCenter Enterprise chassis:

two dualcore 2socket Intel blade servers configured as a Microsoft Cluster

three 2socket blades configured as Web servers with no SAN connectivity

two singlecore 1socket blade servers configured as file servers connecting to the existing SAN storage The customer wants to ensure there is no single point of failure in their LAN and SAN. Which configuration satisfies the customer’s requirement?
A.two Cisco IGESMs, two Optical Passthru Modules, two Fibre Channel Expansion Cards

B.two Copper Passthru Modules, two QLogic 20port Fibre Channel Switch Modules, nine Fibre Channel

Expansion Cards

C.one Cisco IGESM, one QLogic 20port SAN Switch Module, seven Fibre Channel Expansion Cards D.two Cisco IGESMs, two QLogic 10port SAN Switch Modules, four Fibre Channel Expansion Cards Answer: D

21. A company has the following requirements for servers:

VMware 3.0.1 to consolidate several low use servers into two, dualcore 2socket servers with SAN

connectivity

eight, 2socket servers for Web serving and applications with SAN connectivity

existing SAN is DS4700 connected to Brocade Director with plenty of free ports

The customer requires application redirection during peak network traffic times, but the customer also wants to load balance LAN traffic across Web servers within the chassis. Which option satisfies the customer’s requirements?
A.two Nortel Layer 27 GbE Switch modules, two Optical Passthru Modules, ten Fibre Channel Expansion

Cards

B.two Nortel L2/3 copper GbE switch modules, two Optical Passthru Modules, ten Fibre Channel Expansion

Cards

C.two Nortel L2/3 copper GbE switch modules, two Brocade 6port Fibre Channel Switch Modules, two Fibre

Channel Expansion Cards

D.two BladeCenter 4port Gigabit Ethernet switch modules, two Brocade 6port Fibre Channel Switch Modules, ten Fibre Channel Expansion Cards
Answer: A

22. A customer using IBM BladeCenter H wants redundant and separate management and production LANs. What is required to provide redundant connections to separate LANs within the BladeCenter?
A.four Cisco Systems Fibre Intelligent Gigabit Ethernet switch modules

B.two Cisco Systems Fibre Intelligent Gigabit Ethernet switch modules and a BladeCenter Gigabit SFF Ethernet expansion card
C.two IBM Server Connectivity Modules and an Ethernet expansion card CFFv

D.four Nortel Networks Layer 27 GbE switch modules and a BladeCenter Gigabit SFF Ethernet expansion card
Answer: D

23. A customer implementing a VI3 infrastructure requires four Ethernet connections per physical HS21 blade and redundancy on the Virtual Management LAN connection. Which chassis and options installed on the blade
will supply the required functionality?

A.BladeCenter Enterprise, QLogic Ethernet Fibre Channel Expansion Card CFFh on the HS21 blade, and six

IBM Ethernet Server Connectivity Modules

B.BladeCenter H, QLogic Ethernet Fibre Channel Expansion Card CFFh on the HS21 blade, and four Cisco

Systems Fiber Intelligent Gigabit Ethernet Switch Modules

C.BladeCenter Enterprise, Ethernet Expansion Card CFFv, QLogic Ethernet Fibre Channel Expansion Card

CFFh on the HS21 blade, and six IBM Ethernet Server Connectivity Modules

D.BladeCenter H, Ethernet Expansion Card CFFv, QLogic Ethernet Fibre Channel Expansion Card CFFh on the HS21 blade, and six Cisco Systems Intelligent Gigabit Ethernet Switch Modules
Answer: D

24. What is the default network address of the Advanced Management Module and any modules placed in an

I/O module bay if there is no DHCP server? A.192.168.10.x
B.192.16.70.x

C.192.168.0.x D.192.168.70.x Answer: D

25. A customer has a rack with four BladeCenter H chassis that have been operating normally for several

months. After installing a new rack of servers in the data center, the system administrator notices the blowers in the BladeCenters have increased their speed. What caused this problem?
A.The room temperature has reached 23C (73.4F).

B.A Blade within the chassis has been shut down.

C.The ambient temperature in the data center has increased.

D.One of the additional System X servers in the BladeCenter rack has failed. Answer: C

26. A customer installs two BladeCenter chassis in a rack with glass doors. After a short time, the blowers in both BladeCenters increase to full speed, and then one fails. Apart from replacing the broken blower, which additional action is required?

A.replace the glass doors of the rack with perforated doors

B.install fans on the top of the new rack to extract hot air out

C.call IBM Service to get the blowers in both BladeCenters replaced

D.add more blowers to increase the cooling capabilities of the BladeCenter

Answer: A

27. A business partner wants to identify risks, develop action plans to manage the risks, and recommend resources required for a successful implementation of a BladeCenter solution to their customer. What can they do?
A.conduct a ServerProven Opportunity Request for Evaluation (SPORE) B.use the IBM ServerProven Program
C.use IBM System x Configuration Tools D.conduct a Solution Assurance Review Answer: D

28. In which phase should a Solutions Assurance Review be performed? A.BladeCenter deployment
B.installation and configuration C.problem determination/resolution D.customer needs analysis and design Answer: D

29. A customer requires a bladebased NEBS compliant solution with 10Gb Ethernet Switch Modules. Which option satisfies the customer’s requirements?
A.BladeCenter chassis

B.BladeCenter HT chassis

C.BladeCenter chassis with NEBS upgrade option D.BladeCenter T chassis with NEBS upgrade option Answer: B

30. A customer requires a BladeCenter solution that will support DC power and legacy adapters. Which option

satisfies the customer’s requirements?

A.BladeCenter Enterprise and HS21 blades with PCI I/O expansion units B.BladeCenter H and HS21 blades with Ethernet expansion cards C.BladeCenter T and HS21 blades with PCI I/O expansion units D.BladeCenter T and HS21 blades with Ethernet Expansion cards
Answer: C

Testking ibm 000-078 Interactive Testing Engine Included!
250 Questions
Updated : 05/19/2008
Price : $87.99 $79.99

Free down:Testking ibm 000-078
Free down:Pass4sure ibm 000-078