ibm eserver iseries technical solutions implementation v5r3 : 000-867 Exam
Known also as the IBM i5 iSeries Technical Solutions Implementer V5R3 (000-867), this exam plays an integral role in obtaining your certification. All IBM certification exams are extremely detailed and cover many different technological areas. We designed the 000-867 questions and answers for this very purpose, to prepare you for the unexpected. Beyond the testing center, the skills you learn and the knowledge you confirm using the 000-867 practice exams and exam simulators will translate directly into your daily work environment.
Product Description

Exam Number/Code: 000-867

Exam Name:ibm eserver iseries technical solutions implementation v5r3

“ibm eserver iseries technical solutions implementation v5r3″, also known as 000-867 exam, is a IBM certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 142 questions to your 000-867 Exam preparation. In the 000-867 exam resources, you will cover every field and category in Certified Systems Expert helping to ready you for your successful IBM Certification.

Exam Details

The IBM Certified Systems Expert - i5 iSeries LPAR Technical Solutions V5R3 evaluates the customer’s LPAR needs to develop an LPAR technical solution. This expert will plan and implement an integral LPAR iSeries solution and provide ongoing support. To attain the IBM Certified Systems Expert - i5 iSeries LPAR Technical Solutions V5R3 certification, candidates must pass 2 tests.
Question: 6
A model 830 running OS/400 V5R2 is being migrate to a new, scratch install, i5/OS partition on
an eServer i5.570. Due to business requirements a “previous release migration” procedure is required. Which of the following describes a required step to successfully complete the upgrade process?

A. Th V5R2 release upgrade PTFs must be installed on the 830 prior to performing the full system save for the migration
B. After the base i5/OS installation, an i5/OS device description for the V5R3 distribution media must be created to accept licensing terms and conditions
C. On the i5 partition, a DST alternate load device must be selected to load base OS/400, QGPL
and QUSRSYS from the 830 system save media.
D. The V5R2 release upgrade menu to create the migration library must have been run on the
830 prior to the full system save for the migration
Answer: B Question: 7
Selecting the ‘availability’ option when changing ‘Parity Set Optimization’ when iSeries Navigator
Is used to ensure which of the following?

A. The RAID-5 parity set is formatted with its disks attached to I/O adapters on different PCI
buses within an expansion unit
B. The RAID-5 parity set is formed, but a single disk is removed and reserved to mirror the load source disk off the system bus.
C. The RAID-5 parity set is formed with the disks attached to different SCSI busses on the I/O
adapter
D. The RAID-5 parity set is formed with the disks attached to different I/O adapters within a single expansion unit bus.
Answer: C Question: 8
Company.com wants to configure a TCP/IP attached ASCII laser printer for use with their iSeries
system. Which configuration method will allow for the most printer functionality?

A. Configure a remote output queue for the printer device
B. Configure a printer device description with class *VRT and attachment of *IP C. Configure a printer device description with class *RMT and attachment of *IP D. Configure a printer device description with class *LAN and attachment of *IP
Answer: D Question: 9
Where are message logging options for a job initially defined?

A. In the job description associated with the job

B. In the user profile description-running the job
C. In the class associated with the routing entry for the job
D. In the subsystem description for the subsystem in Which the job is running
Answer: A Question: 10
Which of the following is a difference between spooled files stored in an independent storage pool and *SYSBAS?

A. The spooled files in the iASP do not have any user job information stored with them.
B. The *SYSBASE spooled files can be saved with BRMS to tape, while spooled files stored in an iASP cannot
C. Spooled files in an Iasp are limited to jobs that actually run using the iasp as the ASP Group
D. Spooled files stored in *SYSBASE are stored in library QSPL. Spooled files in iasp are stored
In QDBSPLOOxx where xx is the number of the iasp
Answer: A Question: 11
Which of the following steps must be performed prior to applying delayed PTFs to the primary partition of an i825?

A. Power down all secondary partitions.
B. Apply all fixes temporarily using APYPTF C. Perform a source “B” IPL for all partitions.
D. Permanently apply PTFs that are superseded by new PTFs
Answer: A Question: 12
An unrecoverable disk drive failure in the system storage pool has occurred on an iSeries. During
The restore process, what procedure is performed immediately following the installation of the
System Licensed internal Code (SLIC)?

A. configure disk drives
B. Restore User Profiles
C. Install the operating system
D. Restore the System Configuration
Answer: A Question: 13
A new disk unit has been attached to an iSeries in a non-configured status. Which of the following should be done to configure the new disk unit?

A. Set the QAUTOCFG system value to “1″ and restart the system
B. In System Service Tools, add the unit to the appropriate storage pool.
C. Use the STRASPBAL TYPE (*RSMALC) to allocate the disk unit to the ASP.
D. Perform a manual IPL to Dedicated Service Tools, turn on “Automatic disk initialization” and then complete the IPL.
Answer: B Question: 14

Which connection can be used for Operations console?

A. Twinax B. Ethernet C. Wireless
D. ASCII workstation controller
Answer: B Question: 15
Which is the correct command create an autostart job entry?

A. ADDAJE B. CRTAJE C. CRTJOBE
D. ADDJOBE
Answer: A Question: 16
A hosted Linux partition has been configured on an eServer i5. When attempting to telnet to the
IP address of the designated hosting partition on port 2301. the connection is refused. Netstat
*CNN on the eServer i5 shows there is no listener on port 2301. What is needed to enable the listener for port 2301?

A. Create a virtual serial client adapter for the i5/OS partition that connects to the virtual serial host adapter on the Linux partition
B. Use the command ADDSRVTABLE SERVICE (’as-vcons’)PORT (2301) PROTOCOL(TCP) TEXT (’AS/400 Guest Partition Console’) ALIAS (’AS-VCONS’) to define the port and then
restart TCP/IP.
C. Change the CONSOLE parameter on the network server description from *HMC to HOST
and then vary it on.
D. Load licensed program product 5722-LX1.
Answer: A Question: 17
What must a model 720 customer do to FC#4324 17.54 GB Ultra SCSI disk units (7200RPM)
when upgrading to an eServer i5 520?

A. Replace the 7200 RPM drives with comparable 10k RPM drives.
B. Install the FC#6574 4-Dosk Slot Expansion-Base Controller to recognize the 7200 RPM drives. C. Attach a FC#503XmIGRATION tower to the i5 to hold the 7200 RPM drives
D. Install the drives in a FC#5094 PCI-X expansion tower
Answer: A Question: 18
An iSeries customer is migrating from an i810 to a eServer i5 520, including their six existing
17.54 GB disk units. In which disk slot on the 520 should the load source disk unit be placed?

A. P3-D1
B. P3-D2
C. P3-D3
D. P3-D4

Answer: B

Question: 19
Company.com has upgraded a 4-way i820 utilizing LPAR from V4R5 to V5R3 in all partitions. What must be done before partial processor support can be utilized in all partitions?

A. The existing partitions must be configured to utilize uncapped processor support.
B. Remove the processors from the partitions and add them to the shared processor, pool, then
re-assign to the partitions
C. Manual IPL to DST in the primary partition and from the processor Menu and select Enable
Shared Processor Support option
D. At V5R2 installation all processors are placed in the shared processor pool. They must be re- assigned to the partitions.
Answer: B Question: 20
In order to verify that only the intended applications are opening and updating the database,
which of the following actions should be taken?

A. Change the system value QSECURITY to 50 and restart the system
B. Ensure that adopted authority is not being used by any program
C. Verify that object level security is set on all objects within the production database
D. Turn on auditing for open and close on all tables within the production database and review the results
Answer: D Question: 21
A system must be reloaded. The only full system save uses a tape drive not on system bus 1. Another tape drive type is available on bus 1. Which of the following allows the system to be
reloaded in the least time and with the least disruption?

A. Power down the system and swap the tape adapters. Restart the IPL from source “D”.
B. IPL the system in manual mode using a CD at the same version/release level as the full backup. Use DST to select the tape drive used for the full backup as the alternate install device.
C. Re-install system micro code from the distribution CD at the same version/class as the full
backup. Reload the rest of the system from the last full save tapes. Re-install microcode
PTFs to match the PTFs on the save tape.
D. IPL the system in manual mode from the distribution CD at the same version/release level as the backup tape. Use DST’s DUPTAP to copy the full system save to the drive on bus 1. Remove the CD from the drive and IPL from source “D”
Answer: B Question: 22
Which of the following is required to receive licensed internal Code PTF’s?

A. SupportLine contract
B. iSeries Software Subscription
C. IBM hardware maintenance coverage
D. Electronic Service Agent for iSeries

*pass4sure ibm 000-867 Questions and Answers : 142 questions
* Updated: October 2nd , 2008
* Price: $159.99 $99.99
Free down:Testking ibm 000-867
Free down:Pass4sure ibm 000-867

TestKing - TestKing premium Ibm exam training tools and resources

Pass4sure provides high quality Ibm exam practice questions and answers.