aix installation,backup and system rec0ver : 000-233 Exam
Test information:
• Number of questions: 65
• Time allowed in minutes: 90
• Required passing score: 70%
Related certifications:
• IBM Certified Specialist – System p Administration
Exam Topics Include:
• Planning
• AIX and other OS Installation and Update
• Boot Process
• Configuration
• Storage and LVM
• Monitoring and Tuning
• Problem Determination and Resolution
• Backup and Recovery / Disaster Recovery
• Daily Management
Product Description
Exam Number/Code: 000-233
Exam Name:aix installation,backup and system rec0ver
“aix installation,backup and system rec0ver”, also known as 000-233 exam, is a IBM certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 100 questions to your 000-233 Exam preparation. In the 000-233 exam resources, you will cover every field and category in Certified Advanced Technical Expert helping to ready you for your successful IBM Certification.
Exam Details
Certifies an advanced level of AIX knowledge and understanding, both in breadth and depth. Verifies the ability to perform in-depth analysis, apply complex AIX concepts and provide resolution to critical problems, all in a variety of areas within pSeries AIX. To attain the IBM Certified Advanced Technical Expert – pSeries and AIX 5L certification, candidates must pass four tests: one AIX Administration/Support test (from list below) three (3) electives, selected from the list below
QUESTION 1:
Which of the following files must be customized to run a script that further configures the system upon completion of a mksysb install?
A. auto.u
B. inst.data
C. bos.autoi
D. bosint.data
Answer: D
QUESTION 2:
Which of the following commands should be run to rebuild a corrupted jfslog, loglv01?
A. fsck -p loglv01
B. fsck -y /dev/loglv01
C. logform /dev/loglv01
D. /usr/sbin/logform loglv01
Answer: C
QUESTION 3:
After a successful system recovery, it is determined that the server will not support printing so the system administrator has decided to remove the bos.rte.printers
fileset and all of its dependents. Which of the following is the correct method to accomplish this task?
A. Use fastpath “smitty rmvprt” B. Installp -u -g bos.rte.printers
C. Use fastpath “smitty maintain_software”; choose “Remove Installed Software”;fill in values for bos.rte.printers
D. Remove of the bos.rte.printers fileset is not permitted
Answer: D
QUESTION 4:
After a successful recovery, the system administrator wishes to remove the fileset bos.net.tcp.server and all dependent software. After running an lslpp command, it is verified that the fileset is in the BROKEN state. What is the correct method for deinstallation?
Actualtests.com – The Power of Knowing
A. Use installp -u command with -g to remove the fileset and all dependent software.
B. Use installp -c command to commit fileset; use installp command with -g to remove the fileset and all dependent software.
C. Use installp -C command to perform cleanup of fileset; use install command with -g to remove the fileset and all dependent software.
D. Use installp -a command to apply fileset; use installp command with -g to remove the fileset and all dependent software.
Answer: A
QUESTION 5:
Which of the following procedures should occur before removing a failing disk from
a volume group?
A. Veryoff the volume group
B. Unmount any filesystems on the disk
C. Remove all physical partitions on the disk
D. Unmount mirrored filesystems from the disk
Answer: B
QUESTION 6:
A system has a TCPIP issue that is a known problem. The newest code from the support website has been downloaded to resolve the issue. Which of the following commands should be used to install the new code?
A. smitty install_commit
B. installp -ugV C. installp -aX D. instfix -all
Answer: C
QUESTION 7:
Which of the following sequence of commands extracts the third image from a tape that was created using the backup command?
A. tctl -f /dev/rmt0.1 fsf 2 ; tar -xv file3
B. tctl -f /dev/rmt0.0 fsf 3 ; dd if=file3 pf =/dev/mt0.1
C. tctl -f /dev/rmt0.1 fsf 2 ; dd if=/dev/rmt0.1 of=file3
D. tctl -f /dev/rmt0.0 fsf 3 ; dd if=/dev/rmt0.1 of=file3
Answer: C
QUESTION 8:
Which of the following techniques is used to extract the /usr/tmp directory from a mksysb backup?
A. Use the tar command on the fifth image.
B. Use the restore command on the fourth image.
C. Use tctl -f /dev/rmt0.1 fsf 3 followed by the tar command on the fourth image.
D. Reboot using the mksysb tape and then use the dd command to extract the file. Answer: B
QUESTION 9:
A system administrator boots is company’s server in normal mode. The boot process displays a LED 553 and stops. LED 553 indicates that IPL phase one is complete. Which of the following options is the most probable cause?
A. The JFS Log is too small.
B. The bootlist file is corrupted.
C. A problem occurred reading or executing /etc/rc.nfs.
D. A space shortage occurred on /dev/hd4, /dev/hd3, or /dev/hd2. Answer: D
QUESTION 10:
During a system administrator’s attempt to boot the company’s server in normal
mode, the boot process displays an LED 552 and stops. The LED 552 indicates that the vayton the root volume group failed. Which of the following options is the most probable cause?
A. The bootlist is corrupted.
B. The file system log is corrupted.
C. The /etc/inittab file cannot be read or executed. D. The boot recored is corrupted.
Answer: B
QUESTION 11:
During a system boot, an error message appears concerning a paging space,
paging00. The paging space was located on hdisk2, but the disk was removed from
the system without proper software procedures. Which of the following commands
should be used as the first step in the process of recovery?
A. mkps paging00 hdisk0
B. chpv -v r hdisk2
C. chps -a n paging00
D. reducevg rootvg hdisk2
Answer: C
QUESTION 12:
A system administrator was able to boot a system from the AIX installation
CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at
LED 552. Which of the following options is the most probable cause?
A. The ODM is corrupted.
B. There is a hardware failure.
C. The bosboot command failed.
D. Not enough space is available in the filesystems. Answer: A
QUESTION 13:
Rootvg has just been mirrored to a second disk. Which of the following actions should be performed to boot the system off of either disk?
A. Extendvg to include both disks in the rootvg
B. Copy the hd5 logical volume to hdisk1
C. Run the bosboot and bootlist commands
D. Reset the dump device to /dev/sysdumpnull
Answer: C
# pass4sure ibm 000-233 Questions and Answers : 100 questions
# Updated: October 3rd , 2008
# Price: $159.99 $99.99
Free down:Testking ibm 000-233
Free down:Pass4sure ibm 000-233
| IBM Free Downloads |
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Download link |
 |
All Ibm 's Exam Pack |
767 |
1 days ago | Download |
If you would like to make a comment, please fill out the form below.
[...] Support pass4sure 000-222 Exam : P5 and pSeries Administration and Support for AIX 5L V5.3 pass4sure 000-233 Exam : AIX 5L Installation,Backup and System Recovery pass4sure 000-234 Exam : AIX 5L Performance [...]
[...] Support pass4sure 000-222 Exam : P5 and pSeries Administration and Support for AIX 5L V5.3 pass4sure 000-233 Exam : AIX 5L Installation,Backup and System Recovery pass4sure 000-234 Exam : AIX 5L Performance [...]
[...] Pass4sure 000-233 Testking 000-233 Actualtest 000-233 [...]